Artograph Filters & Accessories for Artograph Spray Systems

Artograph Filters & Accessories for Artograph Spray Systems

Artograph



This product has been discontinued by the manufacturer, or is no longer available through ArtSuppliesOnline.com. We apologize for any inconvenience.

Choose the filters or Accessories to fit your Artograph Spray System:

  • Filter Pak (4 ea. mid-filter & poly-carb pads):
    4 each mid-filter & poly-carb filter pads. The mid-filter is a non-woven air-laid polyester substrate with a blue PVC binder on the exit side. Poly-carb filter is a carbon-impregnated polyester offering high odor and further particle-trapping efficiency. Note: Both filters should be replaced at the same time, approximately every three months with regular use or when replacing the Pre-Filter Roll.

  • Pre-Filter Roll:
    Unique roll mounted 100% polyester pre-filter that traps the bulk of the initial spray and provides a continuous clean work surface. To replace, simply pull down the soiled pre-filter through the attached cutting bar, and tear off like a paper towel dispenser. 25" or 30" x 50 yards, 100% spun bonded continuous filament polyester. Provides approximately 90 surface sprays.

  • Activated Carbon Filter: High-density activated carbon material, suspended under a pleated, high-efficiency cotton filter media. (50% fill) Should be replace approximately every six months to a year depending on usage.

  • High Efficiency Activated Carbon Filter High-density activated carbon material, suspended under a pleated, high-efficiency cotton filter media (100% fill). Offers twice the efficiency and more odor removal than the standard activated carbon filter (#225-328). Should be replaced approximately every six months to a year depending on usage.

  • Replacement Spray Guard Hood:
    Corrugated spray guard hood keeps work area clean. Keep your Spray-System looking new. Hoods have been discontinued. Please use your old hood as a template and trace it onto a piece of cardboard.


  • Customer Service